Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Numerical study on the influence of material models for tin-based solder alloys on reliability statements

 
: Metasch, René; Schwerz, Robert; Meier, K.; Röllig, Mike

:
Postprint urn:nbn:de:0011-n-5744591 (1.0 MByte PDF)
MD5 Fingerprint: b8685c11c175f1a026e0959e379b7b22
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Created on: 24.1.2020


Institute of Electrical and Electronics Engineers -IEEE-; International Microelectronics and Packaging Society -IMAPS-:
22nd European Microelectronics and Packaging Conference & Exhibition, EMPC 2019. Technical papers : 16-19 September 2019, Pisa, Italy
Piscataway, NJ: IEEE, 2019
ISBN: 978-1-7281-6291-1
ISBN: 978-0-9568086-6-0
7 pp.
European Microelectronics and Packaging Conference & Exhibition (EMPC) <22, 2019, Pisa>
English
Conference Paper, Electronic Publication
Fraunhofer IKTS ()
lead-free solder; thermo-mechanical properties; unified; Anand; Garofalo; SinH; stationary; secondary; primary; creep; life-time; electronics

Abstract
This paper presents a comparison of three different material models, which are currently used to describe creep behaviour of solder alloys in thermo-mechanical use cases. The first model is the commonly utilized Garofalo approach. This approach is based on a hyperbolic-sine equation to describe the secondary (stationary) creep rates dependent on the mechanical stress in combination with the Arrhenius equation to consider temperature dependencies. The other two material models cover the primary and the secondary creep stage. Here, unified viscoplastic constitutive models initially proposed by Anand and Chaboché et al. are introduced. In the presented FEM study result comparison has been done for the accumulated solder joint strains of a SMT component exposed to thermal cycling. Subsequently, the influence on creep strain progression and service life time estimation has been investigated.

: http://publica.fraunhofer.de/documents/N-574459.html