Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Laser bonded microjoints between titanium and polyimide for applications in medical implants

 
: Mian, A.; Newaz, G.; Vendra, L.; Rahman, N.; Georgiev, D.G.; Auner, G.; Witte, R.; Herfurth, H.

:

Journal of materials science. Materials in medicine 16 (2005), No.3, pp.229-237
ISSN: 0957-4530
ISSN: 1573-4838
English
Journal Article
Fraunhofer ILT ()

Abstract
Bioencapsulation of medical implant devices, and neural implant devices in particular, requires development of reliable hermetic joints between packaging materials that are often dissimilar. Titanium-polyimide is one of the biocompatible material systems, which are of interest to our research groups at Wayne State University and Fraunhofer USA. We have found processing conditions for successful joining of titanium with polyimide using near-infrared diode lasers or fiber lasers along transmission bonding lines with widths ranging from 200 to 300 µm. Laser powers of 2.2 and 3.8 W were used to create these joints. Laser-joined samples were tested in a microtester under tensile loading to determine joint strengths. In addition, finite element analysis (FEA) was conducted to understand the stress distribution within the bond area under tensile loading. The FEA model provides a full-field stress distribution in and around the joint that cause eventual failure. Results from the investigation provide an initial approach to characterize laser-fabricated microjoints between dissimilar materials that can be potentially used in optimization of bio-encapsulation design.

: http://publica.fraunhofer.de/documents/N-57039.html