Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Evolution of the true contact area of laser textured tungsten under dry sliding conditions

 
: Lechthaler, B.; Ochs, G.; Mücklich, F.; Dienwiebel, M.

:
Fulltext ()

Frontiers in mechanical engineering 5 (2019), Art. 3, 6 pp.
ISSN: 2297-3079
Deutsche Forschungsgemeinschaft DFG
MU 959/30-1
Deutsche Forschungsgemeinschaft DFG
DI 1464/5-1
English
Journal Article, Electronic Publication
Fraunhofer IWM ()
direct laser interference patterning; dry friction; in-situ tribometer; real contact area; asperity contact

Abstract
Despite the great importance of the real contact area, it is a parameter which, depending on the tribological system, is difficult or impossible to obtain experimentally. In this work, a combination of methods was used to estimate the development of the real contact surface, and the results were compared with the friction coefficient course. The measurements were carried out with a home-built in situ tribometer, which records a 3D image of the surface after each individual friction cycle. A tungsten sample was treated by laser interference with a line-like pattern to produce a deterministic surface. This allowed for more precise tracking of the real contact area when combined with the use of an inert corundum sphere as a counter-body. The real contact area was calculated numerically from the height information obtained using a contact application. Finally, the true contact surface was compared with the parallel-recorded friction values. After a short running-in phase, the friction behavior and the real contact surface showed comparable courses. This indicates that the changes in the real contact area could explain the friction behavior of the laser-patterned sample, and the methodology was proven to be suitable for experimentally estimating the real contact area.

: http://publica.fraunhofer.de/documents/N-534674.html