Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Modeling of anisotropic behavior of aluminum profile for damage prediction

 
: Andrieux, F.; Sun, D.-Z.

:
Fulltext (PDF; )

Wells, M. ; Canadian Institute of Mining, Metallurgy and Petroleum:
16th International Aluminum Alloys Conference, ICAA 2018. Proceedings : Montreal, Canada, June 2018
Montreal: CIM, 2018
ISBN: 978-1-926872-41-4
Paper 401049, 10 pp.
International Aluminum Alloys Conference (ICAA) <16, 2018, Montreal>
English
Conference Paper, Electronic Publication
Fraunhofer IWM ()
aluminum profile; anisotropy; damage; failure; FEM simulation; material modeling; specimen test

Abstract
Extruded aluminum profiles are increasingly used for lightweight vehicle construction. Since fracture strains of aluminum profiles are relatively low, damage modeling is crucial for reliable crash simulation. For aluminum profiles, not only the stress state but also the orientation influenced both the deformation and damage behavior. For the material characterization smooth tensile tests were performed in six orientations, both stress-strain curves and r-values were registered. Moreover notched tensile and shear-tension tests were performed in three directions. Finally punch specimens were tested to investigate biaxial loading. Digital image correlation (DIC) analyses were performed to determine local strain values such as critical values at failure. Numerical investigations were conducted with the strain based damage model GISSMO, which is well suited and widely applied for crash simulation. For a strain based failure model the choice of the deformation model is crucial. Deformation models with increasing complexity were investigated to find the best compromise over all experiments. It was found that there is still a great requirement on development of a material model which describes the orientation dependence of the hardening behavior over all stress states in order to be able to use a strain based failure model reliably.

: http://publica.fraunhofer.de/documents/N-531492.html