Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

About the Relevance of Defect Features in As-Cut Multicrystalline Silicon Wafers on Solar Cell Performance

: 8th International Conference on Silicon Photovoltaics 2018, Lausanne, Switzerland, 19.03.2018-21.03.2018
: Kovvali, A.; Demant, M.; Trötschler, T.; Haunschild, J.; Rein, S.

Postprint urn:nbn:de:0011-n-5254763 (1.4 MByte PDF)
MD5 Fingerprint: 3c559fa80cfd9be8bb703d7a1c71ca7e
Copyright AIP
Created on: 25.1.2019

Ballif, C. ; American Institute of Physics -AIP-, New York:
SiliconPV 2018, 8th International Conference on Crystalline Silicon Photovoltaics : 19-21 March 2018, Lausanne, Switzerland
Woodbury, N.Y.: AIP, 2018 (AIP Conference Proceedings 1999)
ISBN: 978-0-7354-1715-1
Art. 130011, 8 pp.
International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <8, 2018, Lausanne>
Conference Paper, Electronic Publication
Fraunhofer ISE ()
Photovoltaik; Silicium-Photovoltaik; Charakterisierung; Prozessmaterialien; Silicium-Materialien; rating; solar cells; PERC; multicrystalline; wafers

Recombination-active defects e.g. dislocations in multicrystalline silicon (mc-Si) wafers impact the quality of solar cells. These defects can be quantified during the incoming control of silicon wafers with Photoluminescence (PL) imaging and used to rate the solar cell quality. In this work, we analyze the relevance of defect patterns in PL images and grain-boundary (GB) data for current-voltage (IV) prediction by means of image processing algorithms. Based on a large set of empirical data of passivated emitter and rear cells (PERC), a sparse prediction model is trained for each IV-parameter. Our results include both, the prediction of different quality parameters and the relevance of the features extracted from PL images and GB images. We achieve mean absolute prediction errors as low as 2.72 mV and 0.18 mA/cm2 for open circuit voltage (Voc) and short circuit current density (Jsc) respectively, and 0.18% for efficiency as combined parameter. In this evaluation, the wafer data set is split into training group and test group. Therefore the results show the prediction of unknown material. This makes the prediction more challenging but represents a realistic use case for production. The comparative overview of the relevant feature set shows a difference between the prediction of short-circuit current and open-circuit voltage prediction.