Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Calibration of an array projector used for high-speed three-dimensional shape measurements using a single camera

 
: Wong, E.; Heist, S.; Bräuer-Burchardt, C.; Babovsky, H.; Kowarschik, R.

:

Applied optics 57 (2018), No.26, pp.7570-7578
ISSN: 0003-6935
ISSN: 1539-4522
ISSN: 1559-128X
English
Journal Article
Fraunhofer IOF ()

Abstract
Geometric calibration of digital light processing projectors in single-camera, fringe-projecting 3D measurement systems have been studied assuming the projector is inverse pinhole modeled. Conversely, a high-speed multi-aperture array projector (MAAP) projecting aperiodic fringes is not dependent on a digital mirror device and cannot be pinhole modeled. With MAAP projection, a stereo camera setup is required. This paper presents a model-less method to calibrate a MAAP by direct measurement of its illumination field and re-enables 3D measurements with a single camera even with surface discontinuities present. Experimental proof of principle and preliminary measurement performance are shown.

: http://publica.fraunhofer.de/documents/N-524306.html