Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Development of adapted Ni-738 powder for additive manufacturing

 
: Vogelpoth, A.; Sharma, S.; Schleifenbaum, J.H.

European Powder Metallurgy Association -EPMA-:
Euro PM2018 Proceedings : 14 – 18 October 2018, Bilbao, Spain
Shrewsbury: EPMA, 2018
ISBN: 978-1-899072-50-7
6 pp.
International Powder Metallurgy Congress and Exhibition (Euro PM) <2018, Bilbao>
English
Conference Paper
Fraunhofer ILT ()

Abstract
In this study, Oerlikon AM and Fraunhofer ILT aimed to modify the material composition of Ni-738LC in order to reduce the crack susceptibility of the alloy powder during the LPBF (Powder bed fusion - Laser) process, while maintaining the mechanical properties of the alloy. In order to achieve this, the standard composition of Ni-738LC alloy powder was manufactured by LPBF, focusing on process parameters for a low and high crack counts as base line for further analysis. Experimental powders with modified Ni-738LC compositions were processed and compared in terms of cracking, hardness and microstructure. Electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM) analysis were used to understand the effect of modifications cracking behavior with reference to the standard composition. Finally, the mechanical properties of these alloy were compared via tensile tests at room temperature.

: http://publica.fraunhofer.de/documents/N-524120.html