Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Surface structuring of boron doped CVD diamond by micro electrical discharge machining

: Schubert, A.; Berger, T.; Martin, A.; Hackert-Oschätzchen, M.; Treffkorn, N.; Kühn, R.


Fratini, Livan (Ed.) ; European Scientific Association for Material Forming:
21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Proceedings : 23-25 April 2018, Palermo, Italy
Melville/NY: AIP Publishing, 2018 (AIP Conference Proceedings 1960)
ISBN: 978-0-7354-1663-5
International Conference on Material Forming (ESAFORM) <21, 2018, Palermo>
Conference Paper
Fraunhofer IWU ()

Boron doped diamond materials, which are generated by Chemical Vapor Deposition (CVD), offer a great potential for the application on highly stressed tools, e. g. in cutting or forming processes. As a result of the CVD process rough surfaces arise, which require a finishing treatment in particular for the application in forming tools. Cutting techniques such as milling and grinding are hardly applicable for the finish machining because of the high strength of diamond. Due to its process principle of ablating material by melting and evaporating, Electrical Discharge Machining (EDM) is independent of hardness, brittleness or toughness of the workpiece material. EDM is a suitable technology for machining and structuring CVD diamond, since boron doped CVD diamond is electrically conductive.
In this study the ablation characteristics of boron doped CVD diamond by micro electrical discharge machining are investigated. Experiments were carried out to investigate the influence of different process parameters on the machining result. The impact of tool-polarity, voltage and discharge energy on the resulting erosion geometry and the tool wear was analyzed. A variation in path overlapping during the erosion of planar areas leads to different microstructures. The results show that micro EDM is a suitable technology for finishing of boron doped CVD diamond.