Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

A meta-model based approach for rapid formability estimation of continuous fibre reinforced components

 
: Zimmerling, C.; Dörr, D.; Henning, F.; Kärger, L.

:

Fratini, Livan (Ed.) ; European Scientific Association for Material Forming:
21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Proceedings : 23-25 April 2018, Palermo, Italy
Melville/NY: AIP Publishing, 2018 (AIP Conference Proceedings 1960)
ISBN: 978-0-7354-1663-5
Art.020042
International Conference on Material Forming (ESAFORM) <21, 2018, Palermo>
English
Conference Paper
Fraunhofer ICT ()

Abstract
Due to their high mechanical performance, continuous fibre reinforced plastics (CoFRP) become increasingly important for load bearing structures. In many cases, manufacturing CoFRPs comprises a forming process of textiles. To predict and optimise the forming behaviour of a component, numerical simulations are applied. However, for maximum part quality, both the geometry and the process parameters must match in mutual regard, which in turn requires numerous numerically expensive optimisation iterations. In both textile and metal forming, a lot of research has focused on determining optimum process parameters, whilst regarding the geometry as invariable. In this work, a meta-model based approach on component level is proposed, that provides a rapid estimation of the formability for variable geometries based on pre-sampled, physics-based draping data. Initially, a geometry recognition algorithm scans the geometry and extracts a set of doubly-curved regions with relevant geometry parameters. If the relevant parameter space is not part of an underlying data base, additional samples via Finite-Element draping simulations are drawn according to a suitable design-table for computer experiments. Time saving parallel runs of the physical simulations accelerate the data acquisition. Ultimately, a Gaussian Regression meta-model is built from the data base. The method is demonstrated on a box-shaped generic structure. The predicted results are in good agreement with physics-based draping simulations. Since evaluations of the established meta-model are numerically inexpensive, any further design exploration (e.g. robustness analysis or design optimisation) can be performed in short time. It is expected that the proposed method also offers great potential for future applications along virtual process chains: For each process step along the chain, a meta-model can be set-up to predict the impact of design variations on manufacturability and part performance. Thus, the method is considered to facilitate a lean and economic part and process design under consideration of manufacturing effects.

: http://publica.fraunhofer.de/documents/N-520404.html