Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Powder, process parameters and heat treatment conditions for LaserBeam Melting of LaFeSi-based alloys

: Wieland, Sandra; Kagathara, Jwalant; Gärtner, Eric; Uhlenwinkel, Volker; Steinbacher, Matthias

International Institute of Refrigeration -IIR-; International Institute of Refrigeration -IIR-, Commission Cryophysics - Cryoengineering; International Institute of Refrigeration -IIR-, Commission Refrigerating Equipment, Paris; International Institute of Refrigeration -IIR-, Commission Heat Pumps and Energy Recovery:
8th International Conference on Magnetic Refrigeration at Room Temperature, Thermag 2018 : Darmstadt, Germany, September 16-20, 2018, International Conference on Caloric Cooling; CD-ROM
Paris: IIF/IIR, 2018 (Science et technique du froid 2018, 5)
ISBN: 978-2-36215-028-9
International Conference on Magnetic Refrigeration at Room Temperature (Thermag) <8, 2018, Darmstadt>
International Conference on Caloric Cooling <2018, Darmstadt>
Conference Paper
Fraunhofer IFAM ()
refrigeration; heat exchanger structure; shaping; Laser Beam Melting (LBM); magnetocaloric

Shaping magneto caloric alloys to thin-walled heat exchangers is a viable way to enhance the efficiency of magnetic cooling systems. In this study shaping of La(FeSi)13-based alloys is carried out by Laser BeamMelting (LBM), an Additive Manufacturing method which offers a high degree of geometrical flexibility. Hence this process could be used for a broad variation and optimization of the heat exchanger structures as well as for a small scale production for prototype systems. However, the adaption of the LBM process to La(FeSi)13-alloys requires careful choice of the base powder, the laser melting parameters and the conditions of the subsequent heat treatment. In this work, structures with wall thickness below 500 μm are successfully produced from both La(FeSiCo)13 and LaCe(FeMnSi)13, and the effect of the particle size and composition of the powder and the laser melting parameters is investigated. Additionally, the magneto caloric entropy change after the heat treatment is reported.