Observation of the a-C:H run-in behaviour for dry forming applications of aluminium

Amorphous hydrogenated carbon coatings (a-C:H) are well known for their exceptional tribological properties and are established as tool coatings for numerous forming applications. However, utilized in dry forming processes of aluminium a premature failure of an a-C:H coated tool often occurs due to strong adhesive wear. In this paper the run-in behaviour of a-C:H is investigated and as a possible reason for the premature tool failure evaluated. Therefore, oscillating ball-on-disc tribometer tests and strip drawing tests, for a more realistic emulation of real forming processes, will be conducted. According to these tests, the run-in period of a-C:H coatings is characterized by a high friction value and adhesion tendency and thus is decisive for the tool performance. Based on a subsequent analysis of the coating wear, the predominating wear mechanisms during the run-in period are discussed. The intrinsic nanomater-scale a-C:H roughness is identified as a crucial factor determining the tribological properties of the run-in behaviour. By reducing the coating roughness prior to the forming process, the adhesion tendency and friction value can be reduced significantly. The results demonstrate the tribological performance of pre-treated a-C:H coatings for dry sheet metal forming of aluminium EN AW-5083.