Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Robotic System for Additive Manufacturing of Large and Complex Parts

: Felsch, Torsten; Klaeger, Uwe; Steuer, Jörg; Schmidt, Leander; Schilling, Martin

Postprint urn:nbn:de:0011-n-5072868 (213 KByte PDF)
MD5 Fingerprint: 2202864a52ff1af8b72cd2a69ebc078e
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Created on: 16.11.2018

Institute of Electrical and Electronics Engineers -IEEE-:
ETFA 2017, 22nd IEEE International Conference on Emerging Technologies and Factory Automation : 12-15 September 2017, Limassol, Cyprus
Piscataway, NJ: IEEE, 2017
ISBN: 978-1-5090-6505-9
ISBN: 978-1-5090-6504-2
ISBN: 978-1-5090-6506-6
International Conference on Emerging Technologies and Factory Automation (ETFA) <22, 2017, Limassol/Cyprus>
Conference Paper, Electronic Publication
Fraunhofer IFF ()

In this paper the use of industrial robots in combination with additive manufacturing technologies for the production of large parts is presented. The paper summarizes the results of an ongoing major joint project being completed by industrial companies and research organizations. The objective is to develop a “genuine” three-dimensional additive robotic system that cost effectively builds large models and molds from any thermoplastic material with volumes of 1.000×1.000×1.000 mm 3 . The system combines hereby the advantages of both worlds - flexible and cost effective industrial robots with high innovative additive manufacturing. In particular, the manufacturing technology, the system architecture and the motion planning are presented.