Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Wavelength tuning of through-coating-written fiber bragg gratings

 
: Goebel, T.A.; Voigtländer, C.; Krämer, R.G.; Matzdorf, C.; Heck, M.; Richter, D.; Tünnermann, A.; Nolte, S.

:

Institute of Electrical and Electronics Engineers -IEEE-:
Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference, CLEO/Europe-EQEC 2017 : 25-29 June 2017, Munich, Germany
Piscataway, NJ: IEEE, 2017
ISBN: 978-1-5090-6736-7
ISBN: 978-1-5090-6737-4
pp.999
Conference on Lasers and Electro-Optics Europe (CLEO) <2017, Munich>
European Quantum Electronics Conference (EQEC) <2017, Munich>
English
Conference Paper
Fraunhofer IOF ()

Abstract
This paper reports on the inscription of fiber Bragg gratings (FBGs) into fibers under tension. In order to avoid mechanical weakening of the fiber the coating is not removed and the FBG is directly inscribed through the coating. Releasing the fiber after the inscription leads to a lower period and thus to a lower Bragg wavelength. For the experiments we used a fiber coated with Ormocer or acrylate and a diameter of 80 μm. The fiber core with a diameter of 8 μm was made of pure silica. The inscription process took less than one minute. The fibers with FBGs showed a breaking strength of (4795+498) MPa, similar to the pristine fiber ((5212 + 478) MPa). The FBGs were calibrated as strain and temperature sensors to prove this functionality. For the strain calibration the FBGs show the expected linear behavior with a slope of (1.213 + 0.004) pm/μstrain. The results of the temperature calibration exhibit a slope of (11.07 + 0.31) pm/K. We have demonstrated the inscription of high strain resistant FBGs through the coating of fibers with a diameter of 80 μm. Inscription under tension of the fiber allowed to tune the Bragg wavelength by 5 nm without compromising the mechanical strength.

: http://publica.fraunhofer.de/documents/N-502735.html