Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Ultrashort pulsed laser ablation for decollation of solid state lithium-ion batteries

: Hördemann, C.; Anand, H.; Gillner, A.


Dhere, N.G. ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
Reliability of Photovoltaic Cells, Modules, Components, and Systems X : 6-7 August 2017, San Diego, California, United States
Bellingham, WA: SPIE, 2017 (Proceedings of SPIE 10370)
ISBN: 978-1-5106-1197-9
ISBN: 978-1-5106-1198-6
Paper 103700A, 7 pp.
Conference "Reliability of Photovoltaic Cells, Modules, Components, and Systems" <10, 2017, San Diego/Calif.>
Conference Paper
Fraunhofer ILT ()

Rechargeable lithium-ion batteries with liquid electrolytes are the main energy source for many electronic devices that we use in our everyday lives. However, one of the main drawbacks of this energy storage technology is the use of liquid electrolyte, which can be hazardous to the user as well as the environment. Moreover, lithium-ion batteries are limited in voltage, energy density and operating temperature range. One of the most novel and promising battery technologies available to overcome the above-mentioned drawbacks is the Solid-State Lithium-Ion Battery (SSLB). This battery type can be produced without limitations to the geometry and is also bendable, which is not possible with conventional batteries1 . Additionally, SSLBs are characterized by high volumetric and gravimetric energy density and are intrinsically safe since no liquid electrolyte is used2-4. Nevertheless, the manufacturing costs of these batteries are still high. The existing production-technologies are comparable to the processes used in the semiconductor industry and single cells are produced in batches with masked-deposition at low deposition rates. In order to decrease manufacturing costs and to move towards continuous production, Roll2Roll production methods are being proposed5, 6. These methods offer the possibility of producing large quantities of substrates with deposited SSLB-layers. From this coated substrate, single cells can be cut out. For the flexible decollation of SSLB-cells from the substrate, new manufacturing technologies have to be developed since blade-cutting, punching or conventional laser-cutting processes lead to short circuiting between the layers. Here, ultra-short pulsed laser ablation and cutting allows the flexible decollation of SSLBs. Through selective ablation of individual layers, an area for the cutting kerf is prepared to ensure a shortcut-free decollation.