Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Mass production of magnesium silicide as a TEG material

 
: Schoenhoff, M.; Hilleringmann, U.; Boor, J. de

:

Cornish, D.R. ; Institute of Electrical and Electronics Engineers -IEEE-:
IEEE AFRICON 2017. Science, technology & innovation for Africa : 18-20 September, the Avenue V&A Waterfront, Cape Town, South Africa
Piscataway, NJ: IEEE, 2017
ISBN: 978-1-5386-2775-4
ISBN: 978-1-5386-2774-7
ISBN: 978-1-5386-2776-1
pp.1009-1013
Conference "AFRICON" <13, 2017, Cape Town>
English
Conference Paper
Fraunhofer ENAS ()

Abstract
Despite the promising property of TEGs to convert waste heat into electrical energy, there is currently no commercial break-through for TEGs although high research efforts are present all around the world. One rather neglected barrier is a possible mass production of the requested materials, which makes TEGs commercially interesting for industry. Instead of in research almost exclusively used processes like spark plasma sintering (SPS) and field activated sintering technology (FAST) this paper presents a method to produce Mg2Si with separated compacting and sintering steps. Therefore, an already in industry used sintering process for insulating or metallic materials was transferred to TE-materials by changing the process atmosphere and adding a new developed special stacked set-up. The density-issue of this process was minimized by higher sintering temperatures. RAMAN-spectra, EDX and XRD analysis confirm the desired composition.

: http://publica.fraunhofer.de/documents/N-481550.html