Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Turbidimetric method for the determination of particle sizes in polypropylene/clay-composites during extrusion

 
: Becker, Wolfgang; Guschin, Viktor; Mikonsaari, Irma; Teipel, Ulrich; Kölle, Sabine; Weiss, Patrick

:
Preprint urn:nbn:de:0011-n-4810558 (1.2 MByte PDF)
MD5 Fingerprint: 649a4430a09af9d869f1a7f77b808305
The original publication is available at springerlink.com
Created on: 23.11.2018


Analytical and bioanalytical chemistry 409 (2017), No.3, pp.741-751
ISSN: 1618-2642 (Print)
ISSN: 1618-2650 (Online)
English
Journal Article, Electronic Publication
Fraunhofer ICT ()
Turbidimetry; Particle; Clay-composite; Particle distribution; Process monitoring

Abstract
Nanocomposites with polypropylene as matrix material and nanoclay as filler were produced in a double twin screw extruder. The extrusion was monitored with a spectrometer in the visible and near-infrared spectral region with a diode array spectrometer. Two probes were installed at the end at the extruder die and the transmission spectra were measured during the extrusion. After measuring the transmission spectra and converting into turbidity units, the particle distribution density was calculated via numerical linear equation system. The distribution density function shows either a bimodal or mono modal shape in dependence of the processing parameters like screw speed, dosage, and concentration of the nanoclays. The method was verified with SEM measurements which yield comparable results. The method is suitable for industrial in-line processing monitoring of particle radii and dispersion process, respectively.

: http://publica.fraunhofer.de/documents/N-481055.html