Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Determination of the selectivity of printed wearable sweat sensors

: Zörner, A.; Oertel, S.; Schmitz, B.; Lang, N.; Jank, M.P.M.; Frey, L.


Peixoto, N. ; Institute for Systems and Technologies of Information, Control and Communication -INSTICC-, Setubal:
BIOSTEC 2017, 10th International Joint Conference on Biomedical Engineering Systems and Technologies. Proceedings. Vol.1: Biodevices : Porto, Portugal, February 21-23, 2017
SciTePress, 2017
ISBN: 978-989-758-216-5
International Joint Conference on Biomedical Engineering Systems and Technologies (BIOSTEC) <10, 2017, Porto>
International Conference on Biomedical Electronics and Devices (BIODEVICES) <10, 2017, Porto>
Conference Paper
Fraunhofer IIS ()
Fraunhofer IISB ()

The characterization and system integration of a fully screen-printed electrolyte biosensor is described. The purpose of this sensor is to determine the state of fitness during sports activity by measuring the ammonium concentration in sweat. Focusing on the selectivity of the ammonium sensor against interfering sodium and potassium ions, the separate solution method (SSM) and the fixed interference method (FIM) are compared on the basis of a single sensing device. The latter is mainly supported by the excellent stability of the sensors. For both interfering ions, the FIM analysis shows a sufficient margin for the operation of the sensor in the desired application in wearable health and fitness monitoring from sweat. The selectivity coefficients are better than 0.01 for sodium and still better than 0.1 for potassium. SSM delivers higher selectivity in both cases, although the discrepancies in selectivity point towards further optimization potential in the sensor architecture or materials combination.