Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Reliability experiments of sintered silver based interconnections by accelerated isothermal bending tests

 
: Heilmann, J.; Nikitin, I.; Zschenderlein, U.; May, D.; Pressel, K.; Wunderle, B.

:

Microelectronics reliability 74 (2017), pp.136-146
ISSN: 0026-2714
International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) <17, 2016, Montpellier>
European Commission EC
FP7-ICT; 318117; NanoTherm
Innovative Nano and Micro Technologies for Advanced Thermo and Mechanical Interfaces
English
Journal Article, Conference Paper
Fraunhofer ENAS ()

Abstract
Integration of more functionality and smaller chips into decreasing package volume leads to increasing heat generation. In addition, the use of new compound semiconductors like SiC and GaN require a high thermal conductivity of the interconnect materials. One of the promising solutions is a layer of sintered silver between semiconductor and substrate. The advantages compared to conventional solders are significant. A higher thermal and electrical conductivity in combination with a higher duty temperature due to a higher melting point should enhance the reliability of the package. However, even as the large scale commercial usage of the material has been started by the industry recently, many important details of the mechanical properties and the reliability behavior are still unknown. While the thermal properties could be characterized relatively easy and are quite repeatable and stable, the mechanical properties - important for the reliability - are extremely process-dependent and wide-spreading. The hunt for lowest feasible sintering process parameters - such as temperature, time and especially pressure - even amplify that behavior and led to an impasse in some cases. Also their failure mechanisms, to be identified in lifetime investigations, are yet unknown as well as their stability and predictability. In order to enable prolonged function of these interfaces, thermo-mechanical reliability has to be assured. Within this paper, we show the status of silver sintering and the problems regarding mechanical material characterization found in literature. Additionally, we present a guideline for the mechanical acceleration of reliability experiments by isothermal bending tests. Finally a proof of concept by failure analysis will be presented.

: http://publica.fraunhofer.de/documents/N-480618.html