Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Origin and impact of crystallographic defects in epitaxially grown Si wafers

 
: Janz, S.; Amiri, D.; Gust, E.; Kühnhold-Pospischil, S.; Riepe, S.; Heinz, F.; Drießen, M.

:
Fulltext urn:nbn:de:0011-n-4774720 (363 KByte PDF)
MD5 Fingerprint: 02277d3a7084dd07d0b5b14f44c03d73
Created on: 26.1.2018


Smets, A.:
33rd European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2017 : Proceedings of the international conference held in Amsterdam, The Netherlands, 25 September - 29 September 2017
München: WIP, 2017
ISBN: 978-3-936338-47-8
ISBN: 3-936338-47-7
pp.343-347
European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <33, 2017, Amsterdam>
European Commission EC
FP7; 609788; CHEETAH
Cost-reduction through material optimisation and Higher EnErgy outpuT of solAr pHotovoltaic modules - joining Europe’s Research and Development efforts in support of its PV industry
Bundesministerium für Wirtschaft und Technologie BMWi
0325487; HighVolEpi
Hochdurchsatz Silicium-basierte Schichten und Silicium-Epitaxie für die Photovoltaik
English
Conference Paper, Electronic Publication
Fraunhofer ISE ()
Materialien - Solarzellen und Technologie; Photovoltaik; Silicium-Photovoltaik; Epitaxie; Si-Folien und SiC-Abscheidungen; EpiWafer; defect; wafering; fault

Abstract
In recent years epitaxially grown wafers (EpiWafers) made their way from small laboratory to production scale fabrication. A lot of effort has been put into upscaling of tools, improvement of material quality and in the fabrication of highly efficient solar cells. In this publication we investigate typical crystal defects appearing in EpiWafer material and correlate them with process or reactor specific features like porous templates, thick epitaxial layer growth or inline processing. We find two categories of stacking faults (SFs) which are either decorated with inclusions or not. Besides particles on the surface of the growth template contaminations with oxygen are found to be reasons for such polycrystalline inclusions. Stress leads to either delamination of the template or local lattice strain both reasons for defect growth. Parallel faults which propagate along slipping lines in the material are interacting with SFs although the correlation is not fully understood yet. Finally the recombination activity in SFs is found to be especially high where the 111 planes meet or when strong decorating occurs. This work is a first step to systematically investigate the crystallographic nature of EpiWafer material and will help to further improve processes and equipment.

: http://publica.fraunhofer.de/documents/N-477472.html