Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Cu passivation with self-assembled monolayers for direct metal bonding in 3D integration

 
: Lykova, M.; Panchenko, I.; Geidel, M.; Reif, J.; Wolf, J.M.; Lang, K.-D.

:

Institute of Electrical and Electronics Engineers -IEEE-:
40th International Spring Seminar on Electronics Technology, ISSE 2017 : 10-14 May 2017, Sofia, Bulgaria
Piscataway, NJ: IEEE, 2017
ISBN: 978-1-5386-0582-0
ISBN: 978-1-5386-0583-7
pp.198-203
International Spring Seminar on Electronics Technology (ISSE) <40, 2017, Sofia>
English
Conference Paper
Fraunhofer IZM ()

Abstract
Direct metal bonding is a preferred fine-pitch technology for stacking of Si dies in 3D integration. Cu is a metal of choice for direct metal bonding because it is the most common metal for redistribution layer in advanced semiconductor manufacturing, Cu has high conductivity and it is a low cost candidate. However Cu oxidises very fast in air which makes the bonding procedure challenging. In this study we present the novel technique of Cu passivation with temporary protective self-assembled monolayer (SAM). X-ray photoelectron spectroscopy (XPS) analysis was used in order to carry out the chemical analysis of the Cu surface. Contact angle (CA) measurements provided the information about the monolayer formation. The influence of immersion time and storage conditions on the SAM passivation quality was examined. Storage of a coated Cu surface at low-temperature air conditions was found to be a promising technique for a long-term oxidation retarding. We summarize the key substrate parameters that influence SAM protective capability.

: http://publica.fraunhofer.de/documents/N-470725.html