Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Wet machining of CFRP

 
: Schneider, Marco; Gebhardt, Andreas; Beckenlechner, Robert

:
Fulltext urn:nbn:de:0011-n-4525024 (411 KByte PDF)
MD5 Fingerprint: d50a19b9b37b21781e2b32392e234ea7
Created on: 15.6.2017


European Society for Composite Materials:
17th European Conference on Composite Materials, ECCM 2016. Proceedings : 26-30th June 2016, Munich, Germany
Munich, 2016
ISBN: 9783000533877
8 pp.
European Conference on Composite Materials (ECCM) <17, 2016, Munich>
English
Conference Paper, Electronic Publication
Fraunhofer IPA ()
Carbon-fiber-Reinforced Plastic (CFRP); Staubabscheidung; Staubemission; Flüssigkeitsschmierung; Kühlschmierstoff; Fräsen

Abstract
The machining of carbon reinforced plastics (CFRP) is considerably different from the machining of metallic materials. CFRP is a heterogeneous material, because fibres and matrix have different properties. Furthermore carbon fibres are hard which causes high abrasive tool wear and thus induced high costs. Moreover the sensitivity to temperature of the polymer matrix hinders the adjustment of the process factors (chipping thickness, cutting rate, feed rate) by limiting the maximum cutting rate. Also hazardous and partly alveolar CFRP-dusts, which occur while machining CFRP, display a major problem. Until now the majority of machining takes place without the use of cooling lubricants. Though wet machining can show significant advantages compared to dry machining in the view of productivity, dust binding, machining quality and tool wear. In this article, the potential of wet machining of CFRP is illustrated by means of the milling process.

: http://publica.fraunhofer.de/documents/N-452502.html