Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Low cycle fatigue life assessment of welded high-strength structural steels based on nominal and local design concepts

 
: Möller, B.; Baumgartner, J.; Wagener, R.; Kaufmann, H.; Melz, T.

:

International journal of fatigue 101 (2017), Pt.2, pp.192-208
ISSN: 0142-1123
English
Journal Article
Fraunhofer LBF ()

Abstract
Fatigue life curves of butt joints, transverse stiffeners and sample components with tube-clevis connections, manufactured by active gas metal arc welding (GMAW) of S960QL, S960M and S1100QL high-strength steels, show a linear extension into the low cycle fatigue (LCF) regime with a constant slope up to the yield strength of the material. An extended S-N design curve based on fatigue class FAT 160 (k = 5) gives conservative results for high quality butt welds below the ultimate tensile strength. In comparison to high frequency hammer peening and grinding, TIG dressing of S1100QL butt joints is most favorable for the increase of fatigue life.
The effective notch stress approach with rref = 1.00 mm and measured radii of post treated welds leads to a reliable fatigue assessment up to at least N = 5 • 103 cycles to failure, which confirms FAT 225. The stress averaging approach using the microstructural support increases the assessment quality. A similar assessment reliability for damage parameter Wöhler lines, derived from elastic-plastic FE-analysis, is achieved, if support effects are considered.

: http://publica.fraunhofer.de/documents/N-445263.html