Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Surface roughness and foam morphology of cellulose acetate sheets foamed with 1,3,3,3-tetrafluoropropene

 
: Hopmann, Christian H.; Hendriks, Sven; Spicker, Claudia; Zepnik, Stefan; Lück, Frank van

:

Polymer Engineering and Science 57 (2017), No.4, pp.441-449
ISSN: 0032-3888
ISSN: 1548-2634
Bundesministerium für Bildung und Forschung BMBF
03X2518B
English
Journal Article
Fraunhofer UMSICHT Oberhausen ()
Cellulose; morphology; thermoforming; foams; blowing agent; extruded sheets; bio-based polymers; cellulose acetate; surface roughness

Abstract
Cellulose acetate (CA) is a bio-based polymer suitable to replace foamed polystyrene (PS) in packaging applications. Foam trays can be produced by thermoforming of extruded sheets foamed with physical blowing agents. In this paper, the effects of various process settings and the calibration of the sheet on foam morphology and surface quality of extruded CA sheets are presented. Different contact cooling options were applied in order to investigate their influence on surface roughness, density, and morphology of the sheets. By adjusting cooling parameters, blowing agent formulation, and process settings, smooth foam sheets with a surface roughness below 10 µm and a density in the range of 150 kg m−3 were produced.

: http://publica.fraunhofer.de/documents/N-423009.html