Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Thermohydrogen processing of 3D screen printed titanium parts

 
: Jurisch, M.; Studnitzky, T.; Andersen, O.; Kieback, B.

:

Ebel, T.:
Powder Metallurgy of Titanium II : Selected peer reviewed papers from the 3rd Conference on Powder Processing, Consolidation and Metallurgy of Titanium, August 31 - September 3, 2015, Lüneburg, Germany
Switzerland: Trans Tech Publications, 2016 (Key engineering materials 704)
ISBN: 978-3-03835-539-7
pp.251-259
Conference on Powder Processing, Consolidation and Metallurgy of Titanium <3, 2015, Lüneburg>
English
Conference Paper
Fraunhofer IFAM, Institutsteil Pulvermetallurgie und Verbundwerkstoffe Dresden ()

Abstract
The present study addresses the need for grain refinement in free sintered titanium alloys produced by 3D screen printing. Thermohydrogen processing (THP) was used for temporary alloying Ti-6Al-4V with hydrogen to refine its microstructure. The impact on microstructure was investigated by a parameter study with varying temperatures, exposure times and hydrogen partial pressures. Heat treated specimens were examined by optical microscopy, XRD and thermal analysis. The influence of the refined microstructure on the mechanical properties was evaluated by tensile and microhardness testing. Ultrafine grained microstructures with ultimate tensile strengths of up to more than 1000 MPa could be produced.

: http://publica.fraunhofer.de/documents/N-422765.html