Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Electro-optical circuit board with single-mode glass waveguide optical interconnects

 
: Brusberg, L.; Neitz, M.; Pernthaler, D.; Weber, D.; Sirbu, B.; Herbst, C.; Frey, C.; Queisser, M.; Wöhrmann, M.; Manessis, D.; Schild, B.; Oppermann, H.; Eichhammer, Y.; Schröder, H.; Håkansson, A.; Tekin, T.

:

Schröder, H. ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
Optical Interconnects XVI. Proceedings : 15-17 February 2016, San Francisco, California, United States
Bellingham, WA: SPIE, 2016 (SPIE Proceedings 9753)
ISBN: 978-1-62841-988-7
Paper 97530J
Conference "Optical Interconnects" <16, 2016, San Francisco/Calif.>
English
Conference Paper
Fraunhofer IZM ()

Abstract
A glass optical waveguide process has been developed for fabrication of electro-optical circuit boards (EOCB). Very thin glass panels with planar integrated single-mode waveguides can be embedded as a core layer in printed circuit boards for high-speed board-level chip-to-chip and board-to-board optical interconnects over an optical backplane. Such singlemode EOCBs will be needed in upcoming high performance computers and data storage network environments in case single-mode operating silicon photonic ICs generate high-bandwidth signals [1]. The paper will describe some project results of the ongoing PhoxTroT project, in which a development of glass based single-mode on-board and board-to-board interconnection platform is successfully in progress. The optical design comprises a 500 μm thin glass panel (Schott D263Teco) with purely optical layers for single-mode glass waveguides. The board size is accommodated to the mask size limitations of the fabrication (200 mm wafer level process, being later transferred also to larger panel size). Our concept consists of directly assembling of silicon photonic ICs on cut-out areas in glass-based optical waveguide panels. A part of the electrical wiring is patterned by thin film technology directly on the glass wafer surface. A coupling element will be assembled on bottom side of the glass-based waveguide panel for 3D coupling between board-level glass waveguides and chip-level silicon waveguides. The laminate has a defined window for direct glass access for assembling of the photonic integrated circuit chip and optical coupling element. The paper describes the design, fabrication and characterization of glass-based electro-optical circuit board with format of (228 x 305) mm2.

: http://publica.fraunhofer.de/documents/N-422640.html