Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Integrated galvanically isolated MOSFET and IGBT gate-driver circuit with switching speed control

 
: Lorentz, V.R.H.; Schwarz, R.; Heckel, T.; März, M.; Frey, L.

:
Postprint urn:nbn:de:0011-n-4224636 (596 KByte PDF)
MD5 Fingerprint: 58c1d20343564eaaf579c649a1c89173
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Created on: 14.7.2018


Institute of Electrical and Electronics Engineers -IEEE-; IEEE Industrial Electronics Society -IES-:
41st Annual Conference of the IEEE Industrial Electronics Society, IECON 2015 : 9-12 November 2015, Yokohama, Japan
Piscataway, NJ: IEEE, 2015
ISBN: 978-1-4799-1762-4 (electronic)
ISBN: 978-1-4799-1761-7 (USB)
pp.544-549
IEEE Industrial Electronics Society (IECON Annual Conference) <41, 2015, Yokohama>
English
Conference Paper, Electronic Publication
Fraunhofer IISB ()

Abstract
This paper presents a galvanically isolated gate-driver integrated circuit realized as an ASIC chipset providing a flexible control of the switching speed of the driven power switches (i.e., IGBT or MOSFET). The driver chipset provides signal and power transmission over a galvanic isolation, thus being able to drive low-side and high-side power switches in power converters. It provides independent control of turn-on and turn-off switching speed by modulating the gate turn-on and turn-off voltage slopes using burst pulses in the MHz range. This function is combined with regenerative switching, thus reducing the energy losses in the gate-driver circuit of the power switch by more than 50%. The gate-driver ASIC chipset was manufactured in a high-temperature automotive grade 0.35μm mixed-signal CMOS technology, thus allowing switching speeds in the MHz range at voltage amplitudes as high as 18V. The paper shows the novel proposed driving concept with its implemented topology and simulation results. Experimental results validate the proposed gate-driver concept based on the manufactured ASIC chipset combined with a typical IGBT as power switch.

: http://publica.fraunhofer.de/documents/N-422463.html