Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Direct write grayscale lithography for arbitrary shaped micro-optical surfaces

 
: Eckstein, H.-C.; Stumpf, M.; Schleicher, P.; Kleinle, S.; Matthes, A.; Zeitner, U.D.; Brauer, A.

:

IEEE Photonics Society:
20th Microoptics Conference, MOC 2015 : Fukuoka, Japan 25 – 28 October 2015
Piscataway, NJ: IEEE, 2015
ISBN: 978-4-86348-543-3 (Electronic)
ISBN: 978-4-86348-487-0 (print)
ISBN: 978-1-4799-1729-7 (print on demand)
ISBN: 978-4-86348-486-3 (Electronic)
pp.257-258
Microoptics Conference (MOC) <20, 2015, Fukuoka>
English
Conference Paper
Fraunhofer IOF ()

Abstract
We have developed a novel LED projection based direct write grayscale lithography system for the fabrication of micro-optical freeform surfaces, micro-lenses, diffusors and diffractive optics. In the present publication, we show the benefit of this new technology concerning the high dynamic control of the dosage in combination with a high structure depth of up to 100μm and spatial resolution below 0.5μm. As an example, we demonstrate the performance of the system by showing the fabrication of a 100% filling factor micro-lens-array where the RMS surface deviation does not exceed 0.3% of the total structure depth which means an error less than 30nm at 10μm lens sag. Further, we show that this structuring technology is suitable to generate diffractive optical elements as well as freeform optics and arrays with a high aspect ratio and structure depth showing a superior optical performance.

: http://publica.fraunhofer.de/documents/N-422417.html