Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Tool optimization for dry forming applications

 
: Kunze, Tim; Mousavi, Ali; Stucky, Thomas; Böttcher, Falko; Roch, Teja; Schomäcker, Michael; Lasagni, Andrés-Fabián; Brosius, Alexander

Bobzin, K.:
12th International Conference THe "A" Coatings 2016 : Institute of Production Engineering and Machine Tools Hannover, March 31st-April 1st, 2016; Proceedings
Garbsen: TEWISS, 2016 (Berichte aus dem IFW 2016, 3)
ISBN: 978-3-95900-072-7
ISBN: 3-95900-072-3
pp.201-207
International Conference THe "A" Coatings <12, 2016, Hannover>
Deutsche Forschungsgemeinschaft DFG
LA2513 5-1
Makro- und Mikrostrukturierung von Tiefziehwerkzeugen zur Trockenumformung
English
Conference Paper
Fraunhofer IWS ()
deep drawing; dry forming; ta-C coating; direct laser interference patterning

Abstract
In today’s industry, waste prevention and an efficient use of resources is becoming more important due to economic and environmental requirements. Especially in forming processes such as deep drawing, a reduced use of lubricants can be highly promising in saving resources and reducing production costs. Ultimately, the highest savings can be realized by a complete lubricant free deep drawing process – namely dry forming. In this paper, an approach for lubricant-free forming by means of a protective coating and micro-structuring of the tool is presented. The work focuses mainly on the tool optimization to improve its frictional and wear properties. It is shown that ta-C coated tools can reduce friction up to 15% compared to the lubricated case. Moreover, it is outlined that a micro-structuring of the tool by Direct Laser Interference Patterning technology can reduce the tool wear.

: http://publica.fraunhofer.de/documents/N-421264.html