Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Influence of subsurface plastic deformation on the running-in behavior of a hypoeutectic AlSi alloy

 
: Linsler, D.; Schröckert, F.; Scherge, M.

:

Tribology international 100 (2016), pp.224-230
ISSN: 0301-679X
Leeds-Lyon Symposium on Tribology <42, 2015, Ecully/France>
Deutsche Forschungsgemeinschaft DFG
SPP 1551;
English
Journal Article, Conference Paper
Fraunhofer IWM ()

Abstract
The present publication elaborates on the influence of the initial microstructure preset by machining on the friction and wear behavior of a hypoeutectic AlSi9Cu3 alloy. During running-in the subsurface microstructure of tribological contacts is subjected to shear followed by plastic deformation. Aluminum disks were tested with a steel pin on a pin-on-disk tribometer with focus on running-in and sensitivity phenomena. The systems were operated in the ultra-low wear regime. Wear was measured continuously using Radionuclide Technique. The microstructure of the samples was characterized by nanoindentation, x-ray photoelectron spectroscopy and focused ion beam microscopy. The visualization of subsurface shear by markers in the disks showed a significant correlation of subsurface deformation and wear. With the experiments the relationship between machining and tribological behavior was analyzed and ways to optimize tribological systems were shown.

: http://publica.fraunhofer.de/documents/N-417822.html