Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Additive Manufacturing and Strategic Technologies in Advanced Ceramics

A collection of papers presented at CMCEE-11, June 14-19, 2015, Vancouver, BC, Canada
: Shimamura, Kiyoshi; Kirihara, Soshu; Akedo, Jun; Ohji, Tatsuki; Naito, Makio; Singh, Mrityunjay; Ohji, Tatsuki; Michaelis, Alexander
: American Ceramic Society -ACerS-, Westerville/Ohio


Hoboken, NJ: Wiley, 2016, X, 230 pp.
Ceramic Transactions, 258
International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE) <11, 2015, Vancouver>
ISBN: 978-1-119-23600-9 (print)
ISBN: 978-1-119-23601-6 (online)
Conference Proceedings
Fraunhofer IKTS ()

This volume contains a collection of 22 papers submitted from the below seven symposia held during the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada: // Additive Manufacturing Technologies // Advanced Materials, Technologies, and Devices for Electro-optical and Biomedical Applications // Multifunctional Coatings for Energy and Environmental Applications // Novel, Green, and Strategic Processing and Manufacturing Technologies // Powder Processing Technology for Advanced Ceramics // Computational Design and Modeling // Materials for Extreme Environments: Ultra-high Temperature Ceramics (UHTCs) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases) //


Table of Contents // Preface ix // ADDITIVE MANUFACTURING TECHNOLOGIES // Additive Manufacturing of Micro Functional Structures through Diameter Variable Laser Stereolithography and Precursor Sintering Heat Treatments 3 // Soshu Kirihara // Stereolithographic Additive Manufacturing of Solid Electrolyte Dendrites with Ordered Porous Structures for Fuel Cell Miniaturizations 11 // Soshu Kirihara // Processing of Thermoplastic Suspensions for Additive Manufacturing of Ceramic- and Metal-Ceramic-Composites by Thermoplastic 3D-Printing (T3DP) 19 // U. Scheithauer, E. Schwarzer, A. Haertel, H.J. Richter, T. Moritz, and A. Michaelis // Micro-Reactors Made by Lithography-Based Ceramic Manufacturing (LCM) 31 // U. Scheithauer, E. Schwarzer, G.Ganzer, A. Kornig, W. Beckert, E. Reichelt, M. Jahn, A. Hartel, H. J. Richter, T. Moritz, and A. Michaelis // Functionally Graded Ceramic Based Materials using Additive Manufacturing: Review and Progress 43 // Li Yang, Hadi Miyanaji, Durga Janaki Ram, Amir Zandinejad, and Shanshan Zhang // ADVANCED MATERIALS, TECHNOLOGIES, AND DEVICES FOR ELECTRO-OPTICAL AND BIOMEDICAL APPLICATIONS // A Neutron Detector Based on Boron-10 Enriched Scintillating Glasses 59 // Dat Vu, Makena Dettmann, Victor Herrig, Luiz G. Jacobsohn, Matthew W. Kielty, James Wetzel, Yasar Onel, and Ugur Akgun // Engineering Approach to Improve the Solid State Lighting Characteristics with Translucent Poly Crystalline Alumina 69 // Keiji Matsuhiro, Keiichiro Watanabe, Tsuneaki Ohashi, and Tomokatsu Hayakawa // Single Crystal Fibers of Cladded Doped-YAG for High Power Laser and Amplifier Applications 83// E. Gebremichael, B. Ponting, R. Magana, and G. Maxwell // Single Crystal Growth of Ferroelectric LaBGeO5 for Optical Frequency Conversion Devices 97 //Shintaro Miyazawa, Mitsuyoshi Sakairi, Junji Hirohashi, Makoto Matsukura, Shunji Takekawa, and Yasunori Furukawa // The Growth of Potassium Tantalate Niobate (KTaxNb1-xO3) Single Crystal by Vertical Bridgman Method 105 //Toshinori Taishi, Kazuya Hosokawa, Keigo Hoshikawa, Takahiro Kojima, Junya Osada, Masahiro Sasaura, Yasunori Furukawa, and Takayuki Komatsu // Growth of Y3Al5O12 Single Crystals via Edge-Defined Film-Fed Growth Technique Using MO Crucibles 113 // T. Tokairin, J. Hayashi, G. Villora, and K. Shimamura // MULTIFUNCTIONAL COATINGS FOR ENERGY AND ENVIRONMENTAL APPLICATIONS // Nanoparticle Paste Injection into Gas-Flame Thermal Spray for Speedy Ceramic Coating 123 // Soshu Kirihara // Contribution to Electrochemical Oxidation of a Xanthene Dye onto Cu2O Thin Film Electrode 131 // M. El hajji, A. Tara, Ph. Dony, O. Jbara, L. Bazzi, A. Benlhachemi, and N. Kireche // Solution Precursor Plasma Sprayed Superhydrophobic Surface 141 // Yuxuan Cai, Gisele Azimi, Thomas W. Coyle, and Javad Mostaghimi // Improvement of Interfacial Strength for Thermal Barrier Coatings by Formation of Wedge-Like Thermally Grown Oxide 149 //KazuhiroOgawa, Shun Hatta, and Hiroyuki Yamazaki // Experimental Production of Industrial Roller Coated by Hard-Al2O3 Film using Aerosol Deposition Process 159 // Naoki Seto, Kazuteru Endo, Noriaki Honda, Nobuo Sakamoto, Shingo Hirose, and Jun Akedo // NOVEL, GREEN, AND STRATEGIC PROCESSING AND MANUFACTURING TECHNOLOGIES // Stereolithographic Additive Manufacturing of Ceramics Dendrites to Modulate Energy and Material Flows 167 // Soshu Kirihara // New Lightweight Kiln Furniture—Production Processes and Properties 177 // U. Scheithauer, T. Slawik, E. Schwarzer, F. Tscharntke, H.-J. Richter, T. Moritz, and A. Michaelis // The Role of CALPHAD Approach in the Sintering of B4C with SiC as a Sintering Aid by Spark Plasma Sintering Technique 185 // Mohammad Asadikiya, Christopher Rudolf, Cheng Zhang, Benjamin Boesl, and Yu Zhong // POWDER PROCESSING TECHNOLOGY FOR ADVANCED CERAMICS // Effective Exfoliation of Laminated h–BN Particles by a Novel Rotating Disk Method 195 // Yuichi Tominaga, Daisuke Shimamoto, Kimiyasu Sato, Yusuke Imai, and Yuji Hotta // COMPUTATIONAL DESIGN AND MODELING // Feasible and Reliable Ab Initio Approach to Computation of Materials Relevant for Nuclear Waste Management 207 //Piotr M. Kowalski, George Beridze, Yan Li, Yaqi Ji, Christoph Friedrich, Ersoy a ýo lu, and StefanBlügel // MATERIALS FOR EXTREME ENVIRONMENTS // Phase Evolution Phenomenon during Hot Pressing of the SHS obtained Ti3AlC2 Precursors Powders 221 // L. Chlubny, J. Lis, Cz. Kapusta, D. Zientara, K. Chabior, and P. Chachlowska // Author Index 229 //