Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Energy efficiency of cable-driven parallel robots

 
: Kraus, Werner; Spiller, Alexander; Pott, Andreas

:
Postprint urn:nbn:de:0011-n-3995965 (1.4 MByte PDF)
MD5 Fingerprint: aeddc0211d9740b3a51cc910218a1d5c
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Created on: 29.6.2016


Institute of Electrical and Electronics Engineers -IEEE-; IEEE Robotics and Automation Society:
IEEE International Conference on Robotics and Automation, ICRA 2016 : Stockholm, Sweden, May 16th - 21st, 2016
Piscataway, NJ: IEEE, 2016
ISBN: 978-1-4673-8025-6
ISBN: 978-1-4673-8026-3
pp.894-901
International Conference on Robotics and Automation (ICRA) <2016, Stockholm>
English
Conference Paper, Electronic Publication
Fraunhofer IPA ()
cable-driven parallel robot; paralleler Seilroboter; IPAnema; Energieeffizienz

Abstract
Cable-driven parallel robots, hereinafter referred to as cable robots, use cables to manipulate a mobile platform with 6 DOF. Cable robots have a low moved mass, as the winches with the servo drives are fixed to the machine frame and light weight synthetic fiber cables can be used. Therefore, cable robots are assumed to have a good energy efficiency. To analyze the energy efficiency in detail, we establish an energy consumption model for a cable robot and parametrize it for the cable robot IPAnema 3. Losses in the mechanical parts like winches as well as electrical losses in the servo amplifier and recuperation effects are taken into account. The analysis of the energy consumption shows that the mechanical losses are dominant. The losses occur especially during movement of the robot while the energy needed for statically balancing the load is quite low. We can experimentally determine a maximum winch efficiency of 85%. For dimensioning the drive, one has to add approximately one third of the torque to account for the friction in the mechanics. In a fully-constrained cable robot, the energy consumption can be influenced by the internal tension in a range of 20%. We also compare the energy efficiency of the cable robot with an industrial robot. The comparison shows, that both robots consume almost the same amount of energy.

: http://publica.fraunhofer.de/documents/N-399596.html