Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Structuring by electromagnetic forming and by forming with an elastomer punch as a tool for component optimisation regarding mechanical stiffness and acoustic performance

Strukturierung durch elektromagnetische Umformung und Umformung mit Elastomerstempel als Werkzeug für die Optimierung von Bauteileigenschaften hinsichtlich mechanischer Steifigkeit und akustischem Verhalten
: Psyk, Verena; Kurka, Petr; Kimme, Simon; Werner, Markus; Landgrebe, Dirk; Ebert, Andreas; Schwarzendahl, Mathias

Fulltext urn:nbn:de:0011-n-3706152 (2.8 MByte PDF)
MD5 Fingerprint: 5c8338685bc2004417fb8bdbf32d97ab
Created on: 23.12.2015

Manufacturing Review. Online journal 2 (2015), Paper 23, 11 pp.
ISSN: 2265-4224
Journal Article, Electronic Publication
Fraunhofer IWU ()
Lightweight design; Electromagnetic forming; Elastomer tool; Structure; Stiffness; Acoustic Performance; Sequential forming; Incremental forming

Ecological and economic reasons are forcing industry to improve efficiency and to save energy and resources. Especially for the automotive and transport industry-but also for all other industrial branches dealing with accelerated masses-lightweight design is a key issue for achieving this goal. In current product designs, insufficient geometric stiffness of the part often prohibits exploiting the full potential of weight reduction offered by modern materials. Ideally adapting the geometry to the load profile by implementing appropriate structures frequently allows wall thickness and weight reduction. At the same time, the acoustic properties can be improved in many cases, because the natural frequency of the modified structure is higher compared to a conventionally-designed structure, thus leading to a reduction of awkward low frequency noise (humming). To enable a target-oriented design, the influence of structures manufactured by elastomer tools and by electromagnetic forming (EMF) was analysed systematically. Knowledge about the influence of the structuring technology and the process parameters on the resulting structure properties and the part performance allows conclusions regarding the optimisation of the part functionality via a suitable selection and design of the process.