Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Adhesive bonding of oxide ceramics for complex ceramic parts in high temperature furnaces

: Gadelmeier, Christian; Schmidt, Jens; Jovanovic, Dorde; Zietkowski, Marek; Eckardt, Christian; Gorywoda, Marek


Edtmaier, C.:
20th Symposium on Composites 2015 : Selected, peer reviewed papers from the 20th Symposium on Composites, July 1 - 3, 2015, Vienna, Austria
Durnten-Zurich: TTP, 2015 (Materials Science Forum 825-826)
ISBN: 978-3-03835-515-1 (Print)
ISBN: 978-3-03859-300-3 (CD-ROM)
ISBN: 978-3-03826-985-4 (eBook)
Symposium on Composites <20, 2015, Vienna>
Conference Paper
Fraunhofer ISC ()

Within the scope of the project ENERTHERM: Energy efficiency of thermal processes which is funded by the Bavarian Ministry of Economy (BMWi) components and systems for high-temperature are being developed. Monolithic oxide ceramics (mullite, Al2O3) and oxide-fiber reinforced ceramics (O-CMC) show a high potential for high temperature (HT) applications. Additionally, the demand for complex HT-components such as HT-fanwheels for kilns, supporting HT-lightweight structures or hot gas liners increases. In according to the required component design, joining techniques are needed in order to realize such complex geometries. The generated joints were made by using commercial glass solder from the type Al2O3-SiO2-MgO. For realizing the joining process sintering-joining in HT-kilns was used because of the homogeneous temperature distribution. A CO2 laser (wavelength of 10.6 microns and a power of 1.5 kW) was used for rapid joining process. The mechanical properties were determined in according to DIN EN 843-1 and DIN EN 658-3 (4-point bending strength) and evaluated according to Weibull distribution.