Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

On treatment of ultra-low-k SiCOH in CF4 plasmas: Correlation between the concentration of etching products and etching rate

 
: Lang, N.; Zimmermann, S.; Zimmermann, H.; Macherius, U.; Uhlig, B.; Schaller, M.; Schulz, S.E.; Röpcke, J.

:

Applied Physics. B 119 (2015), No.1, pp.219-226
ISSN: 0340-3793
ISSN: 0721-7269
ISSN: 0946-2171
ISSN: 1432-0649
English
Journal Article
Fraunhofer ENAS ()
Fraunhofer IPMS ()

Abstract
Low-pressure rf plasmas have been applied for etching of ultra-low-k SiCOH wafers using an Oxford Plasmalab System 100. In pure CF4 plasmas, SiCOH layers have been etched for different power values. Using quantum cascade laser absorption spectroscopy in the mid-infrared spectral range, the correlation of online and in situ measured concentrations of two etching products, CO and SiF4, with the ex situ determined etching rates has been studied. The concentration of SiF4 was found to range between 0.6 and 1.4 × 1013 molecules cm3. In contrast the concentrations of CO were measured to be only about 50 % of the SiF4 density with 7 × 1012 molecules cm3 in maximum. The production rate of SiF4, determined from the time behavior of its concentration after plasma ignition, was found to be between 1 and 5 × 1012 cm3 s1. The etching rates varied between 2 and 7 nm s1. Both parameters increase nearly linearly with the applied rf power. It was found that for power values of up to 1.1 kW, the etching rate depends nearly linearly on the in situ monitored concentrations of both etching products. Therefore, the concentration of the etching products can be directly used as a measure of the etching rate.

: http://publica.fraunhofer.de/documents/N-352186.html