Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Feasibility evaluation of virtual metrology for the example of a trench etch process

 
: Roeder, G.; Winzer, S.; Schellenberger, M.; Jank, S.; Pfitzner, L.

:

IEEE transactions on semiconductor manufacturing 27 (2014), No.3, pp.327-334
ISSN: 0894-6507
ISSN: 1558-2345
English
Journal Article
Fraunhofer IISB ()

Abstract
In semiconductor manufacturing, the implementation of advanced process control systems has become essential for cost effective manufacturing at high product quality. In addition to established process control methods, new control techniques such as virtual metrology, where post-process quality parameters are predicted from process and wafer state information need to be developed and implemented for critical process steps. This requires a fab-wide approach due to the objectives of VM, which are to supplement or replace stand-alone and in-line metrology operations, to support fault detection and classification, run-to-run control, or other new control entities such as predictive maintenance. Virtual metrology is typically based on statistical learning methods, and a large variety of potentially applicable algorithms are available. A key challenge of the virtual metrology application is proving its capability to produce precise predictions even in complex semiconductor manufacturing processes. In addition, virtual metrology applications need to be implementable into the specific automation and control environment already present in the respective fab. In this paper, the approach and results of a feasibility study toward the development and implementation of virtual metrology applications in a logic fab are presented. The feasibility study was performed for the prediction of trench depth after a complex dry etch process as the specific use case studied.

: http://publica.fraunhofer.de/documents/N-351806.html