Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Microstructural and mechanical analyses of Ag sintered joints

: Weber, Constanze; Hutter, Matthias; Oppermann, Hermann; Lang, Klaus-Dieter

MESAGO PCIM GmbH, Stuttgart:
PCIM Europe 2014. International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Proceedings. CD-ROM : Nuremberg, 20 – 22 May 2014
Berlin: VDE-Verlag, 2014
ISBN: 978-3-8007-3603-4
PCIM Europe <2014, Nuremberg>
Conference Paper
Fraunhofer IZM ()

Ag sintering is a promising joining technology for high temperature power electronic packaging, particularly for the die attach of power semiconductor dies. Here, usually pressures of more than 20 MPa are applied. However, current studies are aimed at establishing sintering processes with reduced or even without pressure. In order to correlate the quality of the bonding with the applied pressure, as well as with the bonding area and the thickness of the sintered Ag layer, Si dies were mounted on Cu substrates and analyzed using X-ray imaging, ultrasonic microscopy and destructive examination methods such as shear tests and SEM analysis of cross sections.