Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Optical characterization of molded glass optics

 
: Yi, A.Y.; Klocke, F.; Dambon, O.; Wang, F.; Chen, Y.; Zhao, W.

:

Herffurth, T. ; Optical Society of America -OSA-, Washington/D.C.:
Optical Fabrication and Testing, OF&T 2010. CD-ROM : OSA Topical Meeting, Optical Fabrication and Testing (OF&T), 13.-17.6.2010, The Snow King Resort, Jackson Hole, Wyoming, USA
Washington, DC: OSA, 2010 (OSA Technical digest series)
ISBN: 978-1-55752-893-3
Paper OWD5
Topical Meeting "Optical Fabrication and Testing" (OF&T) <2010, Jackson Hole/Wyo.>
English
Conference Paper
Fraunhofer IPT ()

Abstract
In compression molding process, refractive index variation is often introduced in glass during cooling. The variation of refractive index in a molded lens is an important parameter that can influence its optical performance, especially for lenses used in high precision optical systems. In this research, three dimensional (3D) refractive index distribution in molded glass lenses was studied using an optical setup based on Mach-Zehnder interferometer and filtered back-projection reconstruction algorithm. Specifically, phase information was first evaluated by measuring interferometric fringes using a digital camera at pre-determined discrete locations. The 3D refractive index distribution inside of the molded glass lens was then calculated from the phase information.

: http://publica.fraunhofer.de/documents/N-350133.html