Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Ultra hydrophobic wetting behaviour of amorphous carbon films

 
: Schulz, H.; Leonhardt, M.; Scheibe, H.-J.; Schultrich, B.

:

Surface and coatings technology 200 (2005), No.1-4, pp.1123-1126
ISSN: 0257-8972
English
Journal Article
Fraunhofer IWS ()

Abstract
Carbon films are distinguished by their broad structural variability and a corre spondingly wide range of properties varying from diamond-like to graphite-like. This variability is determined by the relation of diamond bonds (sp3) to graphitic bonds (sp2) and can be influenced by addition of other elements. The highest degree of diamond-likeness, e.g. expressed by high hardness, is achieved in pure carbon films. Such super hard films, so-called tetrahedral bonded amorphous carbon films (ta-C), reach a hardness from 40 GPa up to 80 GPa and a Young's modulus from 400 GPa up to 800 GPa. By incorporation of additional elements, not only the mechanical properties but also the surface energy can be varied. PTFE-like properties can be obtained by addition of fluorine or other elements. At Fraunhofer IWS Dresden such doped amorphous carbon films (a-C:X) have been deposited by a special pulsed vacuum-arc technique, the laser-induced pulsed arc (Laser-Arc). The deposition process is characterized by producing a high activated carbon plasma from a pure or doped graphite cathode and its deposition on substrates under vacuum or reactive conditions. The mechanical properties of the doped a-C:X-fi lms were investigated in dependence on the content of the doped elements. Furthermore, the surface energy was determined by means of contact angle measurements. To get ultra hydrophobic properties of a surface additionally to a low surface energy a defined structuring of the surface topography is necessary. Different kinds of such structuring methods and their effects in conjunction with a doped a -C:X-film on the super hydrophobic behaviour are shown.

: http://publica.fraunhofer.de/documents/N-32626.html