Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

A robust contactless capacitive communication link for high power battery systems

 
: Wenger, M.M.; Filimon, R.; Lorentz, V.R.H.; März, M.

:
Postprint urn:nbn:de:0011-n-3243623 (858 KByte PDF)
MD5 Fingerprint: 1cee2263ef43fbbdaad943a7c7de74dd
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Created on: 14.7.2018


Institute of Electrical and Electronics Engineers -IEEE-; IEEE Industrial Electronics Society -IES-:
IEEE 23rd International Symposium on Industrial Electronics, ISIE 2014. Proceedings. Vol.2 : Istanbul, Turkey, 1 - 4 June 2014
Piscataway, NJ: IEEE, 2014
ISBN: 978-1-4799-2399-1
ISBN: 978-1-4799-2400-4
pp.1766-1772
International Symposium on Industrial Electronics (ISIE) <23, 2014, Istanbul>
English
Conference Paper, Electronic Publication
Fraunhofer IISB ()

Abstract
Large Li-ion battery systems are being used in a growing number of applications. Due to lack of standards and various requirements, the battery systems have to be specifically designed for each application. This need for a specific design also affects the battery monitoring circuit. In order to reduce design effort, distributed battery monitoring systems integrated into the cells were proposed. Economies of scale allow these circuits to be produced at low cost per unit as they will be needed in every single battery cell. One of the major challenges of the distributed battery monitoring concept is the communication link for the monitoring circuits: it has to be robust, reliable, and easy to install. As a possible solution, a capacitively coupled data transmission link for a battery system consisting of up to 100 smart battery cells is investigated by simulation and experiment. Relevant influence factors of the physical implementation on a capacitive voltage divider determining the transmitted data signal are identified and evaluated, considering application specific constraints. As a result, a suitable signal conditioning circuit using frequency shift keying (FSK) modulation is proposed and experimental results obtained with a prototype implementation of the proposed circuit are presented.

: http://publica.fraunhofer.de/documents/N-324362.html