Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Rate dependent behavior of crash-optimized adhesives – experimental characterization, model development, and simulation

 
: May, Michael; Hesebeck, Olaf; Marzi, Stephan H.; Böhme, Wolfgang; Lienhard, Jörg; Kilchert, Sebastian; Brede, Markus; Hiermaier, Stefan

:

Engineering fracture mechanics 133 (2015), pp.112-137
ISSN: 0013-7944
Bundesministerium für Wirtschaft und Technologie BMWi
IGF 338 ZN
Robustheit und Zuverlässigkeit der Berechungsmethoden von Klebverbindungen mit hochfesten Stahlblechen unter Crashbedingungen
English
Journal Article
Fraunhofer IFAM ()
Fraunhofer EMI ()
Fraunhofer IWM ()
adhesive joints; cohesive zone modeling; strain rate effects

Abstract
The mechanical properties of crash-optimized adhesive BETAMATE 1496V are characterized over a wide range of strain rates. The information gathered from the mechanical tests are used for developing a fully rate-dependent constitutive law for cohesive interface elements considering both, the strain rate dependency of the initiation stress and the strain rate dependency of the fracture toughness. The model is calibrated and verified against experimental data for tapered double cantilever beam (TDCB) and tapered end notched flexure (TENF) tests. Finally, the model is validated against quasi-static and dynamic experimental results on an adhesively bonded T-joint. The numerical predictions show good correlation with the experimental results.

: http://publica.fraunhofer.de/documents/N-319729.html