Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

In-situ study of the TDDB-induced damage mechanism in Cu/ultra-low-k interconnect structures

 
: Liao, Zhongquan; Gall, Martin; Yeap, Kong Boon; Sander, Christoph; Mühle, Uwe; Gluch, Jürgen; Standke, Yvonne; Aubel, Oliver; Vogel, Norman; Hauschildt, Meike; Beyer, Armand; Engelmann, Hans Jürgen; Zschech, Ehrenfried

:

Microelectronic engineering 137 (2015), pp.47-53
ISSN: 0167-9317
Workshop on "Materials for Advanced Metallization" (MAM) <23, 2014, Chemnitz>
English
Journal Article, Conference Paper
Fraunhofer IKTS ()
time-dependent dielectric breakdown (TDDB); ultra-low-k (ULK) material; copper interconnect; degradation kinetics

Abstract
The time-dependent dielectric breakdown (TDDB) mechanism in Cu/ultra-low-k (ULK) on-chip interconnect structures has been raising serious reliability concerns for state-of-the-art microelectronic devices in recent years. An advanced experimental methodology, which combines transmission electron microscopy (TEM) imaging and an in-situ electrical test using a Hysitron PI95 TEM holder, was used to study TDDB-induced damage mechanisms and degradation kinetics in Cu/ULK interconnect structures. In flawless Cu/ULK interconnect structures with locally very thin Ta-based barriers, slow but massive Cu migration into the SiO2 layer was observed at the bottom corner of the M1 metal after the TaN/Ta barrier had been firstly ruptured by the Ta migration, driven by the high electrical field. More importantly, it was found that both the high electric field and the massive metal migration into the SiO2 can contribute to the final breakdown of the Cu/ULK interconnect structures. The final breakdown spot could be located either at the interface of the SiCN layer and the ULK material or in the SiO2 layer, which depends on the geometry, the kind of dielectric materials (particularly ULK) and the driving force (the high electric field). The results also highlight the importance of the quality of TaN/Ta barrier deposition process, especially at the bottom corner of the M1 metal, to ensure the functionality of the TaN/Ta barriers during the product lifetimes.

: http://publica.fraunhofer.de/documents/N-315895.html