Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Effects of increased tool velocity on mechanical joining of steel and aluminum sheet metals

 
: Jäckel, Mathias; Kraus, Christian; Kropp, Thomas

:
Fulltext (PDF; )

Procedia CIRP 23 (2014), pp.24-28
ISSN: 2212-8271
Conference on Assembly Technologies and Systems (CATS) <5, 2014, Dresden>
English
Journal Article, Conference Paper, Electronic Publication
Fraunhofer IWU ()
mechanical joining; self-pierce riveting

Abstract
The paper shows possibilities for improving the joining process of self-pierce riveting with solid rivets (SPR-SR) by increasing tool velocity.
The focus is put on the joining process of high-strength steel sheets with aluminum sheets. Proper and reliable joining of these material combinations is a major challenge for mechanical joining techniques. In the conventional joining process, with common tool velocities well below 1 m/s, different problems during the joining process caused by the high strength of the steel sheets can occur. These problems can be reduced significantly by increasing tool velocity.

: http://publica.fraunhofer.de/documents/N-315852.html