Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Approach to an FE simulation of coating damage on bulk metal forming tools

Ansatz zur FE-Simulation des Schichtversagens an Umformwerkzeugen
 
: Oppermann, Christian; Schmidt, Gerhard; Drossel, Welf-Guntram

:

Diamond and Related Materials 50 (2014), pp.157-165
ISSN: 0925-9635
English
Journal Article
Fraunhofer IWU ()
coatings; diamond-like carbon; mechanical properties; micro tensile test; scanning probe technique; FE simulation

Abstract
This paper describes the numerical simulation of failure mechanisms of coated forming tools and explains the procedure of a finite element analysis (FEA) of the coating - substrate - system. The development of a static failure model is explained using the examples of thermally sprayed and amorphous carbon coatings. Furthermore, its implementation into the FE model is demonstrated. Sprayed thick coatings are used initially, the developed methods are then transferred to amorphous thin coatings. Necessary thermomechanical material properties, especially in the case of thin coatings, as well as system characteristics such as adhesion strength are insufficiently known. Together with FEA several techniques are employed to determine applicable model parameters using parameter identification. The paper only considers monolayers. In a first approximation both substrate and coating are considered homogeneous and isotropic.

: http://publica.fraunhofer.de/documents/N-313465.html