Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Solid biofuel production by mechanical pre-treatment of brewers' spent grain

 
: Weger, Andreas; Binder, Samir; Franke, Matthias; Hornung, Andreas; Ruß, Winfried; Mayer, Wolfgang A.

:

Ranzi, E.:
Selected articles by invitation from iconBM : International Conference on BioMass. Florence 4-7 May 2014
Mailand: AIDIC, 2014 (Chemical engineering transactions 37)
ISBN: 978-88-95608-28-0
pp.661-666
International Conference on BioMass (iconBM) <2014, Florence>
English
Conference Paper, Journal Article
Fraunhofer UMSICHT Sulzbach-Rosenberg ()

Abstract
The brewing industry produces large amounts of by-products and wastes like brewers' spent grain (BSG). In Germany, each year approximately 2.1 million tonnes of BSG are generated. During the last years conventional routes of BSG utilization face a remarkable change, such as the decline in the demand as animal feed. Due to its high content of organic matter energetic utilization may create an additional economic value for breweries. Furthermore, in the recent past breweries tend to shift their energy supply towards more sustainable concepts. Although, a decent number of research projects were carried out already, still no mature strategy is available. However, one possible solution can be the mechanical pretreatment of BSG. This step allows optimized energy utilization by the fractionation of BSG. Due to the transfer of digestible components, such as protein, to the liquid phase, the solid phase will largely consist of combustible components. That represents an opportuni ty to produce a solid biofuel with lower fuelnitrogen content compared to only thermal dried BSG. Therefore, two main purposes for the mechanical pre-treatment were determined, (1) to reduce the moisture content to at least 60 % (w/w) and (2) to diminish the protein content of the solid phase by 30 %. Moreover, the combustion trials should demonstrate whether stable processes and flue gas emissions within the legal limits in Germany are feasible. The results of the mechanical pre-treatment trials showed that a decrease of the moisture and protein content has been achieved. With regard to the combustion trials inconsistent outcomes were found. On the one hand a stable combustion was realized. On the other hand the legal emission levels of NOx (500 mgm -3) and dust (50 mgm-3) could not be kept during all trials. The further research steps will focus on the optimization of the air/fuel ratio by reducing the primary and secondary air conditions.

: http://publica.fraunhofer.de/documents/N-301120.html