Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Modular microsystems with embedded components

 
: Böhme, Christian; Ostmann, A.; Schneider-Ramelow, M.

International Microelectronics Assembly and Packaging Society -IMAPS-:
46th International Symposium on Microelectronics, IMAPS 2013 : September 30 - October 3, 2013, Orlando, Florida
Reston, Va.: IMAPS, 2013
ISBN: 978-1-62993-824-0 (Curran-Ausgabe)
pp.735-739
International Symposium on Microelectronics (IMAPS) <46, 2013, Orlando/Fla.>
English
Conference Paper
Fraunhofer IZM ()

Abstract
Each system is designed to fulfill the desired purpose. It is defined by its inputs, outputs, structure, environment, boundary, and the including elements (subsystems). Due to the ongoing miniaturization and integration the complexity of subsystems increases continuously. This paper is intended to demonstrate the build-up of modular Microsystems. By using the embedding technology, each subsystem (module) is interchangeable and stackable. Therefore, the functionality of the entire system depends solely on the selected modules. Moreover, the enhancement, expansion or redesign can be accomplished by replacing existing or adding new modules. The communication between the individual modules is based on the standardized I²C bus. Additionally, a USB interface has been implemented to manage the data transmission between the embedded camera module and a computer. The whole system recognizes each module and performs accordingly. The user can access sensor values, watch the video stream, and change the parameters of each module via a Graphical User Interface (GUI) on his computer. To achieve the build-up of the modular Microsystems we only used packaged active and passive components. Depending on the complexity of each module a core of up to eight layers is build up. The components are then soldered onto both sides of the core. At this point the components are embedded using a laminating press. The afterwards even surface is then structured again, to enable the stacking of the modules. Each step of the entire assembly process is done via state of the art circuit board processing technologies, including laser drill and laser-direct imaging.

: http://publica.fraunhofer.de/documents/N-297973.html