Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Heat exchangers made of polymer-bonded La(Fe,Si)13

 
: Skokov, K.P.; Karpenkov, D.Y.; Kuz'min, M.D.; Radulov, I.A.; Gottschall, T.; Kaeswurm, B.; Fries, M.; Gutfleisch, O.

:

Journal of applied physics 115 (2014), No.17, Art.17A941, 4 pp.
ISSN: 0021-8979
ISSN: 1089-7550
European Commission EC
FP7; 310748; DRREAM
Bundesministerium für Bildung und Forschung BMBF
03V0540; MagKal
English
Journal Article
Fraunhofer ISC ()

Abstract
We report on magnetocaloric properties of polymer-bonded La(Fe,Si)(13) heat exchangers with respect to the grain size of the powder used and the pressure applied for compaction of plates. Quite remarkably, it was found that the values of the adiabatic temperature change of polymer-bonded plates are 10% higher than in the initial bulk material. A critical value of the pressure applied during the compaction was found. Exceeding this value leads to a drastic reduction of the magnetocaloric effect due to cracking and comminution of the initial 50-100 mu m grains down to 1-10 mu m fragments. Compacting the LaFe11.6Si1.4 powder with 5 wt.% of silver epoxy under an optimal pressure of 0.1 GPa resulted in the production of 0.6 mm-thick plates. These plates were subsequently stacked and glued together into a simple porous heat exchanger with straight 0.6 mm-width channels.

: http://publica.fraunhofer.de/documents/N-296304.html