Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Real-time laser cladding control with variable spot size

: Arias, J.L.; Montealegre, M.A.; Vidal, F.; Rodriguez, J.; Mann, S.; Abels, P.; Motmans, F.


Helvajian, H. ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
Laser 3D Manufacturing : February 2014, San Francisco, California, United States
Bellingham, WA: SPIE, 2014 (Proceedings of SPIE 8970)
ISBN: 978-0-8194-9883-0
Paper 89700Q
Conference "Laser 3D Manufacturing" <2014, San Francisco/Calif.>
Conference Paper
Fraunhofer ILT ()

Laser cladding processing has been used in different industries to improve the surface properties or to reconstruct damaged pieces. In order to cover areas considerably larger than the diameter of the laser beam, successive partially overlapping tracks are deposited. With no control over the process variables this conduces to an increase of the temperature, which could decrease mechanical properties of the laser cladded material. Commonly, the process is monitored and controlled by a PC using cameras, but this control suffers from a lack of speed caused by the image processing step. The aim of this work is to design and develop a FPGA-based laser cladding control system. This system is intended to modify the laser beam power according to the melt pool width, which is measured using a CMOS camera. All the control and monitoring tasks are carried out by a FPGA, taking advantage of its abundance of resources and speed of operation. The robustness of the image processing algorithm is assessed, as well as the control system performance. Laser power is decreased as substrate temperature increases, thus maintaining a constant clad width. This FPGA-based control system is integrated in an adaptive laser cladding system, which also includes an adaptive optical system that will control the laser focus distance on the fly. The whole system will constitute an efficient instrument for part repair with complex geometries and coating selective surfaces. This will be a significant step forward into the total industrial implementation of an automated industrial laser cladding process.