Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

On an improved boron segregation calibration from a particularly sensitive power MOS process

Über eine verbesserte Kalibrierung der Segregation von Bor mittels eines besonders sensitiven Leistungs-MOS-Prozesses
 
: Koffel, S.; Burenkov, A.; Sekowski, M.; Pichler, P.; Giubertoni, D.; Bersani, M.; Knaipp, M.; Wachmann, E.; Schrems, M.; Yamamoto, Y.; Bolze, D.

:

Physica status solidi. C 11 (2014), No.1, pp.12-15
ISSN: 1610-1634
ISSN: 1610-1642
ISSN: 1862-6351
European Materials Research Society (Spring Meeting) <2013, Strasbourg>
European Commission EC
FP7-ICT; 216436; ATHENIS
English
Journal Article, Conference Paper
Fraunhofer IISB ()
silicon; boron; segregation; threshold voltage; simulation

Abstract
One of the main issues for the simulation of MOS transistors is the correct prediction of threshold voltages that depend on the active doping profiles in the channel under the gate oxide. Simulating a power MOS process we encountered a situation in which Sentaurus Process with default models failed to predict threshold voltages by as much as 3 V. An in-depth investigation revealed that the threshold voltage in our pMOS devices is determined by a very special distribution of the doping in the channel that involves both n-type and p-type doping which nearly compensate each other. As threshold voltages were found in the simulations to be particularly sensitive to boron segregation, silicon samples were implanted with boron and oxidized in several atmospheres for a variety of process times. The profiles were studied by advanced SIMS methods. Because of the limitations of the SIMS depth resolution, they had to be complemented by electrical measurements on MOS transistors. This combination finally allowed finding a new calibration for the segregation models which allows predicting the electrical characteristics of the transistors in a wide range of experimental conditions. Since the threshold voltage in our transistors turned out to be extremely sensitive to the boron segregation parameters, in contrast to technologies in which only one dopant type prevails, the newly achieved calibration should be superior to previous work.

: http://publica.fraunhofer.de/documents/N-275418.html