Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Electrical modeling of the power delivery to an LED array packaged in a textile

 
: Curran, B.; Öz, A.; Linz, Torsten; Ndip, Ivan; Guttowski, Stephan; Lang, Klaus-Dieter

:
Fulltext urn:nbn:de:0011-n-2738397 (1022 KByte PDF)
MD5 Fingerprint: 9e6db9d9016b1960d4a2f6eefd8d5793
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Created on: 8.1.2014


Institute of Electrical and Electronics Engineers -IEEE-:
IEEE Electrical Design of Advanced Packaging and Systems Symposium, EDAPS 2013 : Nara, Japan, 12 - 15 December 201
Piscataway, NJ: IEEE, 2013
ISBN: 978-1-4799-2313-7 (Print)
ISBN: 978-1-4799-3741-7
ISBN: 978-1-4799-2311-3
pp.116-121
Electrical Design of Advanced Packaging and Systems Symposium (EDAPS) <2013, Nara>
English
Conference Paper, Electronic Publication
Fraunhofer IZM ()

Abstract
Recent technologies enable large arrays of LEDs to be integrated into textiles, which has applications in the lighting industry. Two analytical modeling techniques are proposed that calculate the supply power at a source necessary to provide the LED drivers with a minimum voltage. The modeling techniques show a correlation with numerical simulations to within 10% but can be implemented for very large LED arrays where, for time constraints, numerical simulations become impractical. The modeling allows a designer to optimize the location of the supply voltage, which can reduce the increase in voltage over the ideal voltage by 40%.

: http://publica.fraunhofer.de/documents/N-273839.html