Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Isothermal and nonisothermal fatigue crack growth of nickelbase alloy MAR-M247 CC (HIP)

 
: Schweizer, C.; Schlesinger, M.; Charkaluk, E.

Beck, Tilmann ; Deutscher Verband für Materialforschung und -prüfung e.V. -DVM-, Berlin; American Society for Testing and Materials -ASTM-, Philadelphia/Pa.:
Seventh International Conference on Low Cycle Fatigue, LCF 2013 : September 9-11, 2013, Aachen, Germany
Berlin: DVM, 2013
ISBN: 978-3-9814516-2-7
pp.147-152
International Conference on Low Cycle Fatigue (LCF) <7, 2013, Aachen>
English
Conference Paper
Fraunhofer IWM ()
fatigue crack growth; cyclic crack-tip opening displacement; fracture mechanics; thermomechanical fatigue; nickelbase superalloy

Abstract
In this paper results from fatigue crack growth tests performed under isothermal and nonisothermal conditions are presented in the temperature range between 300 °C and 1050 °C. When correlating the results with the range of the stress intensity factor, a strong temperature dependence is observed under isothermal conditions. Under nonisothermal conditions, the results depend significantly on the phase relation between stress and temperature. In order to get a more uniform description of the fatigue crack growth results, a mechanism based model based on the cyclic crack-tip opening displacement is used. The model is extended to time dependent effects by including the time and temperature dependent creep deformation of the crack-tip opening displacement. The correlation of the fatigue crack growth results with the cyclic crack-tip opening displacement yields a significantly reduced influence of the temperature under isothermal and nonisothermal fatigue conditions. For the rather fast loading cycles, which were used under isothermal conditions, only a weak creep influence is predicted by the model.

: http://publica.fraunhofer.de/documents/N-267334.html